中文 / EN

Classification
Contact Us
Tel:0579-85581226

Name:Manager xue

Phone:13221281166 

QQ:781763920
E-Mail:781763920@qq.com
Adder:Zhejiang province Jinhua city Yiwu Zhao Zhai 5 District 2 Building No. 2
News
Briar
Briar, the English word source from the French Bruyere, it is a low shrub, mainly grown in the European Mediterranean region. A piece of birch, which can really be used to make pipes, is usually derived from mature maturing roots of about 250 years. Its characteristics are very dry and hard and heat-resistant. After making the first selection of heather root, first clean the wood root, check which flaws, which is damaged, then cover the chopped stone in the soil for three months, remove it This is the first stage of all production processes, but it is one of the most labor-intensive and high-loss steps. After cutting the box, do a check, screening. Screening finished Phoebe and then placed in the water continued to boil, destroy the final vitality of wood. The final step is to place these briar blocks in the drying room for natural drying for several months, waiting for the manufacturer to come to buy.
In the past, each pipe is slowly hand-grinding out, but because of the rapid growth in market demand, manual speed has been undesirable, so the master they have developed a special function of the mechanical device. These devices make handmade master design with another breakthrough, pipe and therefore have a higher quality. Today, the production of a pipe in a total of 75 steps in five stages to complete all the fighting body shape and processing, so the pipe is not just a tool, it is a work of art.
From a rough piece of wood cut into a usable size of the size, and then use the machinery to fight the bucket from the bucket dry out. At this time, the original appears to be the same as the two can easily distinguish between flax. The poor quality of the heather, bucket body will be flawed, mostly moth or crack, usually the vast majority of pipe has flaws. So completely flawless is very rare.